In a typical environment where this machine works effectively, the sound emission is about 48 dBA. Also, the operating temperature is between 50 0F and 90.5 0F, while humidity is between 20 and 80% without condensation. Connection with the machine is through a 4-pin USB type B port. Furthermore, the width of the printer is about 14.6 inches, while the height is 8.5 inches. It also has a depth of 9.9 inches while the net weight reaches up to 12.57 lbs. Download Canon LASER SHOT LBP3000 driver from Canon Website
If you are searching for Canon LBP 3000 driver, you have arrived on the right page. Here in this page, we have given the lbp 3000 printer driver download links for Windows XP, Vista, Windows 7, 8, 8.1, 10, 11, Server 2000, 2003, 2008, 2012, 2016, 2019, 2022 (32-bit, 64-bit).
Canon Lbp3000 Printer Driver For Windows Xp
Download: https://urlcod.com/2vJc17
The USB class driver is installed.First delete the USB class driver, and then reinstall the printer driver.Delete the USB class driver when it is not possible to install the printer driver correctly when using a USB connection. Note that even if you delete the USB class driver, it will be installed again automatically when you connect the printer and your computer with a USB cable.
I went to Settings, selected printers, then add. After going through the questions that it asked about what the computers share name was, it asked about what kind on printer. I ran through the list that was built into the Ubuntu OS and found the MP500, and then I asked it to install and it found the printer, (which is shared in the network), and installed the drivers that it needed and then allowed me to print a test sheet that came out perfectly. The total time that it took to install the printer was probably five minutes or less, and the version of Ubuntu is 12.10 with the rest of the network on various levels of Windows from XP to W'7. I am not sure what process that you are trying to use, but that is how I installed my Canon, and it was pretty straightforward. Good Luck.
This is the solution to install canon lbp 3000 printer in a ubuntu 11.10 over a lan connection from a computer having windows connected directly tothe printer.Note the Following models are supported LBP2900LBP3000LBP3100/3108/3150LBP3200LBP3250LBP3300LBP3310LBP3500im using a ubuntu 11.10 system 32 bit
To work around this issue, manually download and install the printer driver to be installed from the Windows Update Catalog. In the example of the driver mentioned in the Symptoms section, install according to the following procedure.
After the printer driver list appears, select the target driver, and then select Next to go through the remaining wizard steps and complete all installation tasks. Contact your printer vendor for more information about which printer driver must be downloaded for the printer that you are using.
Most excellent! I wonder why Canon won't link to this driver themselves (and translate it in the process).It is worth noting that the drivers are rather old and thus not all printing options are supported in every application. I first thought is was because I'm running on an Intel Mac, but Photoshop has got all the (printer specific) extras, so I guess it's a matter of Cocoa/Carbon applications using different hooks to the printing system.---
Thank you so much for this hint. I was searching since a long time for a solution to print from my PB to a Canon LBP 1210 printer. Now it works perfectly. Well done!Anybody knows a driver for this printer for Linux? I tried the one on the Canon webpage, but I could not get it to work.
Hello, I'm hoping someone can help. I've just got a Mac running Tiger and am trying to install the driver you linked to. The install seems to go OK and the machine resets, but then I can't see any available option for my LBP-1120 printer. There seems to be a capt folder in the libraries/printers/canon directory and I can get the print monitor .app running, but selecting this as my printer just isn't working. I'm running 10.4.8 on a g4 powermac. Please help!
---dirtymouse - 'fix a troubled Mac' - troubleshooting PDF [ Reply to This # ] Canon LBP series CAPT printer driver available Authored by: KRM on Dec 12, '07 07:46:14AM Hello all. I'm currently in Japan using OSX 10.5 on a MacBook.Just bought a LBP3300 with hopes of making it work on either OSX or Parallels (running XP).I grabbed the driver DMG listed here (much thanks to dirtymouse) and the install went fine.Problem is, when i try to print i get the error "Specified paper is incorrect".I am using A4 paper, have the back of the printer set to A4, the tray is set to A4 and EVERYTHING in OSX set to A4.I grabbed the English PDF manual from the AU Canon site. The software portion of the manual obviously only deals with the Windows software. The manual mentions that once you install the printer and load up the paper, you need to first "register the paper size" because the tray/printer cannot auto-sense the size (the A4/Letter switch on the back deals on with duplexing if i understand the docs correctly).The manual then goes on to describe the process of how you register the paper size using the Windows software. It appears that the Win util sends this info to the printer, not just setting the OS driver options.I see no way of doing this "registering" from the OSX. I would assume that the full Japanese installer has a util or method for this but that's just a guess.Not sure if this was necessary with the LBP3000 that dirtymouse is using, but if it was, perhaps that was originally taken care of by using Virtual PC on the Mac. I'm currently trying to get the printer to show up in XP under Parallels, but that's a whole other can of worms that we wont get into here.If anyone has any thoughts on this, i'd love to hear them.Many thanks,KRM
Thanks for the hint. I have downloaded the driver for Mac Leopard, but when I go to print on my LBP-2410 the message that appears says that it is the wrong paper selection and a red light appears on my printer. I don;t seem to be able to change the setting or anything to choose the default tray (there is only one). What do I do?
---dirtymouse - 'fix a troubled Mac' - troubleshooting PDF [ Reply to This # ] Canon LBP series CAPT printer driver available Authored by: david.shaw on Jun 25, '08 08:04:15PM G'day, I just installed the CAPT driver for Leopard, however System Preferences is permanently recognising my Canon LBP-1120 as idle, yet when I run the Printer Utility it cannot find a connection. Also, when I try to run the CAPT Printmonitor "Get Printer Information", the response is "Failed to read Module. Reinstall.: 10511"Anybody have any ideas? Please?
Hey, im having a similar problem with loading my LBP-1120 printer. I have Mac os x 10.5.4. I have downloaded version 1.7 of the canon japanese driver but when i try and print the printer remains idle and the status comes up as stopped. Any help will be appreciated.
---dirtymouse - 'fix a troubled Mac' - troubleshooting PDF [ Reply to This # ] Canon LBP series CAPT printer driver available Authored by: Cathy2008 on Oct 31, '09 11:16:39AM Hi,Just installed snow leopard on my husbands mac after previously having tiger and running the mxcapt160 for the canon LBP-1120 fine.When we upgraded it could see the printer but just kept sending out blank pages when we tried to print. Now installed the mxcapt170 and while it loads onto the 'print and fax' preferences fine, I keep getting the error message: System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr failed when trying to print.I've tried powercycling, rebooting and reinstalling, but nothing seems to help.Would be really grateful for any pointers
Sorry, but you're out of luck (as am I). On Canon's Japanese web site, they state that the following CAPT printers will not be supported under 10.6: LBP-1210, LBP-1120, LBP-1110. I tried last month to find an alternative driver, but so far nothing has surfaced.
Hi. I own LBP 3100 and I'm using OS X 10.5. I've Downloaded a the recommended driver, the Chinese one in the end. The printer as appear in the pirinters now, but still no luck with getting anything to print. It sends to printer, but I get nothing?Any help would be much appreciated. I'm new to a mac.
Also found this post true google. I've tried everything that is over here. Tried lots of other things on other sites, but nothing worked.Really getting tired of this.My printer is canon I-sensys LBP 2900BNothing with that CAPT works, anyone has a tip for me? Or where i could find the right capt to get this thing starting? Everytime i install cap and then i go to printer and faxes, and nothing is over there, and trying to add a printer doesnt work either.Rebooted en unplugged thousand times.Having the newest macbook with software 10.6.2i really hope someone can help me!Grtzz
Probably a dumb question ... downloaded and installed driver (mxcapt160.dmg) as suggested. It quit all applications and restarted. Set up printer in system prefs. But my printer Canon LBP 3200 did not appear in drop down box when selecting driver. I am using mac os 10.6.2. Tried copying the CAPT file to the library file that contained other printer files. Any suggestions please?
It tooks 5h to find it... I live in China and as other fellows I bought printter "no problem" and then i hv to find all by my self.I went to my friend office bcze there was one chines girl who talk good english..So finally problem is solve... just go to www.canon.com.sg(singapore)Note that most these so called "fake promised" on web and free program etc...are "hook" if u press anytime "yes" etc and you downloead something it is usually virus etc.. so, read, think and take you time..these russian ""mobs" just enjoy life bcze so many stupid people "click" yes so easily.there u can find if and rest is easy... just donload right driver "LBP3018B" I hv no idea why "B" is there but it works... I hv pover book Pro and newest 10.6.5 MAC OS and all is now well :)There are also many other printter but this was what I try to find 2 days before I get info where and how.. Brgds,M 2ff7e9595c
Comments